Licensed & Insured, in Buffalo and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Buffalo
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (716) 261-3070 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Buffalo and surrounding areas · On-site visits included · Free estimate within 24h
Buffalo Metal Roofing is a team of local certified professionals based in Buffalo. We respond quickly in Buffalo and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (716) 261-3070⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews
“We needed the roof on our dairy barn redone before winter and these guys knocked it out in about four days with a crew of five. They tore off the old rusted panels and had new ribbed steel on the whole 6,000 square feet before the first frost. Cows are dry and I'm not worrying about snow load this year.”
Commercial & Agricultural Metal Roofing
“Our Victorian's porch roof was a mess and I was dreading the cost of a full tear-off. Buffalo Metal Roofing did a retrofit right over the old shingles with standing seam panels and it looks like it was always meant to be there. The crew even matched the trim to the original house color, which I didn't expect.”
Metal Roof Over Shingles (Retrofit)
“Had the red barn's roof replaced after years of patching, should've called these folks sooner. They handled the whole thing in two days, cleaned up every stray screw, and the new panels shed hay dust and rain like nothing. Honest pricing too, no surprise line items.”
Commercial & Agricultural Metal Roofing
“They installed our standing seam roof in the middle of January, which I figured would be a disaster, but the crew worked around the cold and got it done in three days. The charcoal finish looks sharp and I love that I'll never have to shovel around ice dams again.”
Standing Seam Metal Roofing
“We had a leak that only showed up around the chimney during heavy rain, and two other roofers couldn't figure it out. These guys found the failed flashing in about ten minutes and fixed it properly with new metal flashing the same week. No more bucket in the living room.”
Metal Roof Leak Repair
“Full replacement on our 1,800 square foot ranch, old steel off, new stone-coated panels on, gutters swapped to match. Took them a week and a half and the yard was spotless when they left. Only gripe is the dumpster sat in the driveway a day longer than promised, but the roof itself is flawless.”
Metal Roof Replacement
“After a sheet of snow slid off our metal roof and nearly took out the porch railing, I called these guys to add snow guards. They came out fast, installed a full run of guards across the whole south slope, and explained how the ice protection works. Should've done this the day the roof went on.”
Snow Guards & Ice Protection
“Booked an inspection on our Tudor before listing the house and they were thorough, walked the whole roof, checked every seam and the skylight flashing, and sent a written report with photos. Found one loose fastener they re-sealed on the spot. Fair price and no pressure to upsell anything.”
Metal Roof InspectionReal photos of our work in Buffalo · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener ribbed panel installation | Starting at $8/sq ft | Includes panels, underlayment, and trim; price rises with pitch and roof complexity. |
| Standing seam installation | Starting at $12/sq ft | Hidden fasteners and formed trim included; steep or cut-up roofs move the rate up. |
| Stone-coated steel or metal shingle | Starting at $11/sq ft | Includes profile panels and trim; dormers and valleys add labor and waste. |
| Tear-off and deck repair | On estimate | Priced after we inspect sheathing; older Buffalo homes often need partial re-sheeting. |
| Travel | Included | In Buffalo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, standard gable | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and basic flashing on a straightforward roof |
| Standing seam with tear-off and deck repair | Starting at $13/sq ft | Adds removal of existing layers and replacement of rotted sheathing found during tear-off |
| Complex roof with valleys, dormers, and chimneys | On estimate | Cut-up roofs need an on-site takeoff before we can price the flashing and panel layout |
| Snow guards and ice protection add-on | Quoted per roof section | Priced by the number of guards and the roof sections that dump over walks or doors |
| Travel | Included | In Buffalo and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and metal replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, ice-and-water shield, and new metal system. |
| Standing seam replacement | Starting at $11/sq ft | Concealed fasteners and raised seams; price rises with roof pitch and panel length. |
| Exposed-fastener panel replacement | Starting at $7/sq ft | Corrugated or ribbed panels; best value for barns, shops, and outbuildings. |
| Deck repair and sheathing replacement | On estimate | Soft sheathing from ice dams must be seen before a number is given. |
| Travel | Included | In Buffalo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel retrofit | Starting at $7/sq ft | Ribbed steel panels over a slip sheet, with new eave trim and fasteners included. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-fastener panels with raised seams, priced higher for the cleaner profile and better snow shedding. |
| Stone-coated steel or metal shingle retrofit | Starting at $10/sq ft | Textured panels that satisfy HOA or historic design rules, priced by profile and color. |
| Deck repair or added layers | On estimate | Soft decking, extra shingle layers, or complex valleys need an on-site look before a number. |
| Travel | Included | in Buffalo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair and reseal | Starting at $450 | Includes service call, roof inspection, and minor resealing or a few fastener replacements. |
| Screw replacement and re-fastening | Starting at $650 | Covers pulling backed-out screws and installing new gasketed fasteners along affected rows. |
| Panel replacement (1 to 3 panels) | Starting at $900 | Includes removing damaged panels, installing new ones, and resealing surrounding laps and seams. |
| Flashing rebuild (chimney, skylight, wall) | Starting at $750 | New metal flashing and sealant at the penetration, priced by height and access difficulty. |
| Storm or ice dam damage repair | On estimate | Needs an on-site look to assess panel, trim, and decking damage before quoting. |
| Travel and estimate | Included / Free | No mileage fee in Buffalo and surrounding areas; free written estimate within 24 hours. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair | Starting at $450 | Covers a single traced leak with fastener reseal or flashing touch-up; access and roof pitch move the price. |
| Fastener replacement and re-fastening | Starting at $650 | Replaces backed-out or corroded screws with new sealing washers; panel count and roof height qualify the rate. |
| Flashing or seam rebuild | Starting at $900 | Rebuilds failed flashing at a chimney, skylight, or sidewall, or closes separated standing seam panels. |
| Emergency tarping after storm | Starting at $550 | Secures the roof after lake-effect wind or snow damage to stop active water intrusion; urgency and access drive cost. |
| Complex or large-scale leak repair | On estimate | Multiple entry points, hidden leaks, or structural involvement need an on-site inspection before we quote a number. |
| Estimate | Free | Response within 24 hours at (716) 261-3070, with no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (garage or small shed) | Starting at $750 | Covers a walkover, replacement of loose screws and cracked washers, and a water test on the repaired runs. |
| Full screw and washer replacement (residential) | Starting at $1,450 | Pull and replace every fastener on a typical single-story garage or camp roof, with new EPDM washers. |
| Barn or shop building re-fastening | On estimate | Larger screw counts, steel purlins, and working height all need an on-site count before we quote. |
| Oversized fastener retrofit | On estimate | Stripped or elongated holes require stepping up fastener diameter, priced after we probe the purlins. |
| Travel | Included | In Buffalo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (garage or shed) | Starting at $5.50/sq ft | Includes 29-gauge panels, underlayment, closures, and standard trim on a simple gable roof. |
| Ribbed R-panel roof (shop or barn) | Starting at $6.50/sq ft | Includes 26-gauge panels, vented ridge, and screw pattern set for high wind zones. |
| Retrofit over existing shingles | Starting at $7.00/sq ft | Includes purlins, panels, and trim; price rises with layer count and code limits. |
| Complex or large-scale job | On estimate | Steep pitch, multiple penetrations, or bad access needs an on-site look before a number. |
| Travel | Included | in Buffalo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel shingles | Starting at $9/sq ft | Includes underlayment, standard flashing and basic trim; pitch and roof complexity move the price up |
| Stamped steel shingles | Starting at $11/sq ft | Includes premium profile, color trim and fasteners; dormers, valleys and turrets add labor |
| Retrofit over existing shingles | Starting at $8/sq ft | Includes prep and layer verification within code limits; deck repair or added strapping raises cost |
| Complex or historic home | On estimate | Steep pitches, multiple valleys, historic review or custom colors need an on-site look first |
| Travel | Included | in Buffalo and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof, standard pitch | Starting at $9/sq ft | Includes tear-off, underlayment, panels, and basic flashing on an accessible roof |
| Slate or shake profile upgrade | Starting at $11/sq ft | Textured premium profile with heavier shadow lines and upgraded trim details |
| Steep or cut-up roof with dormers | On estimate | Pitch, dormers, turrets, and multiple penetrations add labor and staging time |
| Snow guard and ice protection package | On estimate | Priced per linear foot based on roof run, pitch, and entries below |
| Travel | Included | In Buffalo and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay roof | Starting at $20/sq ft | Includes custom-formed copper panels and new underlayment; price rises with curve complexity. |
| Full copper standing seam roof | Starting at $28/sq ft | Includes concealed clips and soldered seams; roof pitch and access affect the final rate. |
| Zinc or aluminum specialty panels | Starting at $22/sq ft | Includes formed panels and flashing; metal choice and panel profile move the price. |
| Complex turret or custom fabrication | On estimate | Curved panels, finials, and soldered details need an on-site measurement before pricing. |
| Travel | Included | In Buffalo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard coating system | Starting at $2.50/sq ft | Includes power-wash, rust treatment, primer, and two finish coats on sound panels. |
| Rust treatment and re-fastening add-on | Starting at $0.75/sq ft | Covers screw replacement and spot priming where rust has taken hold at fasteners. |
| Reflective cool-roof coating | Starting at $3.25/sq ft | High-reflectance finish for commercial and agricultural buildings with large roof runs. |
| Complex or steep roof | On estimate | Steep pitch, heavy detail, or historic trim needs an on-site look before we quote. |
| Estimate | Free | On-site inspection and written quote within 24 hours at (716) 261-3070, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight curb flashing repair | Starting at $600 | Includes resealing or replacing curb flashing on one skylight, with sealant rated for freeze-thaw. |
| Chimney flashing repair | Starting at $850 | Covers step and counter-flashing around one masonry chimney, including cutting a new reglet. |
| Full chimney re-flash | Starting at $1,200 | Removes all old flashing and installs new counter-flashing, apron, and seal; price moves with chimney height and access. |
| Custom bent flashing | On estimate | Complex dormers, valleys, and historic profiles need an on-site look before we quote a number. |
| Travel | Included | In Buffalo and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad-style snow guards, typical residential roof | Starting at $1,200 | Includes layout, guards, and sealing; roof size and pitch move the price. |
| Bar and rail system over walkways or driveways | Starting at $1,800 | Continuous rails clamp to seams and stop large slides; linear footage drives cost. |
| Eave ice protection add-on | Starting at $450 | Targeted treatment at the lower edge; number of eave runs and access affect the total. |
| Hybrid layout on complex or steep roofs | On estimate | Rails over drop zones plus pads across the field; needs an on-site look first. |
| Travel | Included | in Buffalo and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and damage report | Free | Full roof and attic check with photos, written repair versus replacement assessment included |
| Minor storm repair (screws, seams, small flashing) | Starting at $350 | Re-fastening, gasket replacement, and seam re-seating, priced by panel count and roof access |
| Panel replacement and flashing rebuild | Starting at $900 | Matching panel profile and color, chimney or skylight flashing, access and staging affect the number |
| Partial slope or section replacement | On estimate | Widespread damage needs an on-site look at panel type, lift access, and material match |
| Travel | Included | In Buffalo and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (716) 261-3070, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic metal roof inspection | Free estimate | On-roof visual check with photo documentation, priced by roof size and access difficulty |
| Detailed inspection with written report | Starting at $250 | Includes fastener testing, seam and flashing review, and a written report with photos |
| Insurance or real estate documentation | Starting at $350 | Full photo documentation and damage assessment formatted for insurers or buyers |
| Large or complex roof system | On estimate | Multiple levels, steep pitch, or many penetrations need an on-site look before pricing |
| Travel | Included | in Buffalo and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (716) 261-3070, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter, standard residential run | Starting at $9/linear ft | Includes on-site forming, heavy-duty hidden hangers, and standard downspout outlets for a typical single-story run. |
| Oversized trough and downspouts | Starting at $14/linear ft | Larger trough and outlets sized for high-volume metal roof runoff, priced higher for extra material and fittings. |
| Snow guards and heat cable add-on | On estimate | Priced by run length and roof access, since guard rows and cable routing depend on panel layout and eave height. |
| Two-story and steep-access work | On estimate | Height, staging, and steep pitch drive the labor, so we measure on site before quoting the run. |
| Travel | Included | Covered in Buffalo and surrounding towns, with no separate call-out or mileage fee added. |
| Estimate | Free | Response within 24 hours at (716) 261-3070, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial or agricultural roof inspection and written scope | Free estimate | On-site walk, panel and fastener assessment, and a written repair versus replacement breakdown. |
| Repair and re-fastening on existing metal roof | Starting at $850 | Covers failed screw and washer replacement, lap sealing, and minor flashing correction on a sound roof. |
| Exposed-fastener ribbed panel replacement | Starting at $4.50 per sq ft | Includes tear-off of existing panels, new ribbed steel, washers, and trim on a simple gable. |
| Standing seam panel system installation | Starting at $9.50 per sq ft | Concealed fasteners, raised seams, and full flashing package; pitch and panel gauge move the number. |
| Large warehouse or multi-building farm scope | On estimate | Needs an on-site look at purlins, deck, insulation, and access before any number is given. |
| Travel to Buffalo and surrounding areas | Included | No separate call-out or mileage fee across Buffalo, the Southtowns, and Niagara County. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Buffalo need a crew that understands this climate, not a crew that learned roofing in a milder place. Buffalo Metal Roofing is a network of licensed, insured local contractors who install, replace, re-roof, and repair metal roofing across Buffalo and the surrounding areas. We work on steep pitches, roofs buried under heavy tree cover, and high-exposure homes that take the full force of lake-effect snow and wind off Lake Erie. We also know the large stock of aging screw-down roofs across the region, many now 15 to 30 years old, where fasteners and sealing washers are reaching the end of their service life.
From Buffalo proper to Amherst, Williamsville, Clarence, and Tonawanda, we match the roofing system to the house and the site conditions, not to a sales target. If you want straight guidance on whether your roof needs a repair, a re-roof, or a full Metal Roof Installation, start with a conversation and a free estimate.
Most metal roof leaks in Western New York start at a fastener. On exposed-fastener roofs, each screw relies on a small EPDM sealing washer to keep water out. Over 15 to 30 years of freeze-thaw cycles, summer heat, and winter wind, those washers dry out, shrink, and crack, and the screws themselves can back out of the purlin. Once the seal is gone, water finds the hole. The same pattern shows up at separated seams as panels expand and contract with temperature, at failed pipe boots and flashing around chimneys, skylights, and valleys, at wind-lifted or peeled panels after a storm, and at punctures from fallen limbs.
Ignoring a small leak is how a small leak becomes a structural problem. Water tracks along purlins and decking and often shows up inside the house far from where it entered. By the time a ceiling stain appears, sheathing may already be rotting and insulation may be saturated and failing. That is why we diagnose the source, not just the stain, and explain what we find in plain language.
The honest call is often repair, not replacement. If the panels and finish are sound and the problem is tired fasteners and worn seals, a full Screw Replacement & Re-Fastening service often restores a watertight roof for a fraction of the cost of a new one. When seams, flashing, or panel condition point to a failing roof, we say so and walk you through the options. For active leaks, call (716) 261-3070 or request a free estimate and we will inspect the roof and show you what is actually happening.
We install the full range of metal roofing systems, and the right one depends on your home, your budget, and how long you plan to stay. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, which makes it the premium choice for shedding lake-effect snow and avoiding screw maintenance over its life. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, shops, cabins, and budget-minded homes. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The trade-off is simple: standing seam costs more up front but has no exposed screws to service, while screw-down costs less and needs its fasteners checked and replaced over the roof's life. When the existing deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate, code-compliant option that saves on tear-off and disposal. When the deck is soft or the existing layers are at their limit, a tear-off and full Metal Roof Replacement is the right call.
Metal roof pricing in Buffalo is quoted by the square foot for installations, while repairs are often flat-rate depending on scope. The variables that move the number most are the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Expect typical ranges to vary widely from project to project; final pricing depends on the roof and site conditions, and we put it in writing after an inspection.
Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer and is never a promise from us. For a clearer picture of how systems and scopes compare, see our pricing page, then request a free estimate or free roof inspection so the numbers are based on your actual roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we see and let the process run honestly.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color choices on older Buffalo homes. Requirements vary, always verify with the Buffalo building or planning department before starting your project. If you have questions about documentation or next steps, contact us.
Ready to get started? Buffalo Metal Roofing serves in Buffalo and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Buffalo · Response within 24h · No commitment · ☎ (716) 261-3070
Your Free Quote Request